1200-Gallon Water Faucet Filtration System, Nano ACF Faucet Water Filter, 2.2GPM High Flow Stainless Steel Tap Water Filter, Fits Most Faucets, Removes Chlorine, Metals, Sediments and More, by Hansing

Client on the first, Product on the top
Before developing this faucet water filter, we have done much research and testing, and we found that the traditional faucet water filters has two defects, as noted below.1. Did not work when the flow rate is more than 0.5GPM, such a low flow may be suitable for low water pressure countries, but it feels pretty inappropriate for American consumers.2. Even if the flow rate lower than 0.5GPM , the capacity is still no more than 200 gallons.
Why’s that? It is clear that the filter cartridge is too small, it means the filtering path is too short. If the flow rate exceed 0.5GPM, this will lead to the chemicals has no enough time to be adsorbed. In addition, because of the space limit, no matter how many stages it was designed, the filter cartridge could only be wedged 20-50 grams filtering material, so the service life is very short.
For the above-mentioned defects, our company adopts Japanese activated carbon nanofiber (ACF), non-woven fabric and wet molding process to achieve optimal design. It can eliminates Chlorine (99%), Lead (93.7%), bad tastes and odors within 0.1s, and the capacity could reach up to 1200 gallons (Based on 2.2GPM flow rate , 1PPM chlorine level). If your flow rate exceed 2.2GPM after the installation because of high water pressure, you don’t need to worry, I’m pretty sure it still works very well, because we have been tested it work at 3.5GPM flow rate.
Other Necessary Information:Housing material: 304 stainless steelControl valve material: chromed brassCartridge type: activated carbon fiberApplicable water sources: tap waterProcessing capacity: 1200 gallonsApplicable water pressure: 15-60PsiOperating temperature: 40-140℉