DALY BMS 16s 48v for Lifepo4 32650 3.2v Nominal wide application..

**PLEASE READ BEFORE BUYING**

BMS x 1
balance wire x 1

This model is non-bluetooth model. you cannot add bluetooth with this model. there is no connection for bluetooth.

Product Description~
– Use top quality (A-level) protective integrated circuit IC, from the solution of Japan.
– Strong load ability, constant discharge current 30A 60A 100A, use high voltage resistance
– inner resistance power Mosfet. The heat sink will greatly help cooling.
– IC itself has power balancing function. The circuit is simple and reliable.
– Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery
– Extreme low power consumption. The consumption of the whole device is less than 50uA.
– PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating

Specs:
-Over Charge Detection Voltage: 3.75±0.05V
-Over Charge Detection Delay Time: 0.5S
-Over Charge Release Voltage: 3.55±0.05V
-Cell balancing Detection Voltage: 3.5V
-Cell balancing Release Voltage: 3.5V
-Cell balancing Current: 30±5mA
-Over Discharge Detection Voltage: 2.2±0.05V
-Over Discharge Detection Delay Time: 0.5S
-Over Discharge Release Voltage: 2.7±0.05V
-Over Current Protection Condition: Disconnect the load
-Detection Condition: Exterior Short Circuit
-Detection Delay Time: 250uS
-Release Condition: Disconnect the load

Attention:
?Control instructions: remote control device monitoring.
?Vehicle icon: data transmission send command
?Statistical report: Collect the data information, the customer can monitor the battery capacity & other alarm infomation.
?Electronic fence: fence setting limit range.
?Device information: device parameter information, etc.