Daly BMS for Lifepo4 20s 60v compatible w/ 32650 3.2v solar battery

BMS x 1
balance wire x 1

Description
– Use top quality (A-level) protective integrated circuit IC, from the solution of Japan.
– Strong load ability, constant discharge current 30A 60A 100A, use high voltage resistance
– inner resistance power Mosfet. The heat sink will greatly help cooling.
– IC itself has power balancing function. The circuit is simple and reliable.
– Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery
– Extreme low power consumption. The consumption of the whole device is less than 50uA.
– PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating

specification
Over Charge Detection Voltage: 3.75±0.05V
Over Charge Detection Delay Time: 0.5S
Over Charge Release Voltage: 3.55±0.05V
Cell balancing Detection Voltage: 3.5V
Cell balancing Release Voltage: 3.5V
Cell balancing Current: 30±5mA
Over Discharge Detection Voltage: 2.2±0.05V
Over Discharge Detection Delay Time: 0.5S
Over Discharge Release Voltage: 2.7±0.05V
Over Current Protection Condition: Disconnect the load
Detection Condition: Exterior Short Circuit
Detection Delay Time: 250uS
Release Condition: Disconnect the load