Hot Glue Gun, 20W Mini Hot Melt Glue Gun High Temp Melting Glue Gun, Glue Gun Mini for Crafts and Arts, DIY, School, Home, Sealing

How to use hot glue gun？
Step1: Insert one end of the glue strip into the glue strip groove of the hot glue gun and push it to the top.
Step2: After the hot glue gun is plugged in, warm up for 3-5 minutes.
Step3: Pull the trigger, the glue strip will enter the glue gun and dissolve the glue for use.
Step4: When the glue strip is almost used up, insert the new glue strip from the end of the gun and contact with the original glue strip before continuing to use; Do not pull the glue strip from the glue inlet to avoid damage to the glue gun.
warning：
1. After use, do not pull out the adhesive strip.
2. Avoid using in humid environment.
3. When using, please do not touch the nozzle and the sol, and avoid the contact of children.
4. Please disconnect the power if it is not applicable after 15 minutes.
5. When the temperature of the adhesive strip is low, the drying speed is faster, and it is recommended to increase the temperature of the contact surface when bonding.
And improve the bonding speed.
6. After use, it is recommended to turn off the power in advance, use the melted glue, and the temperature in the gun will remain
Heat can also cause some glue out.