JITEXING 316L Stainless Steel Mechanical Turbocharger Gas Fuel Saver Intake Modified Throttle Air Filter for Gasoline Diesel Engines (41-46 mm)

Installation Notes
Before installation, turn off the vehicle and disconnect the battery negative (black line). Role: speed up sensor identification (intake value adjustment), speed up the effect.

Intake pipe installation:

A. Install the hose connected to the throttle valve (if the size is appropriate), the throttle valve depth is 5CM,
or put the product into half (2CM) into the throttle iron port, and then open the middle ring U-shaped card to fix.

B. If the length of the pipe reaches 20CM and above, install two and the other one is installed in the air filter port or the intake hose (behind the sensor).

C. If the intake pipe is long and straight (more than 20 CM), one of the throttle and air filter needs to be installed.
If only one is installed, please install it at the throttle end. Large displacement and automatic transmission
can be installed in the exhaust pipe three-way catalysis and muffler, the effect is more perfect.

D. The installation position varies with the vehicle. The installed turbine must be parallel to the inner wall of the pipe.
If the angle is generated or the hose bend is too large, the air intake effect will be affected.
Please pay attention to the installation of the front and the back.

After installation, turn on the battery negative pole, wait 3-5 minutes, then turn the key to the ON position to energize (but do not ignite the vehicle), let the driving computer slightly recognize.

Wait for another 3-5 minutes, turn the key to the START position, start the car, and slowly step the throttle to the air, so that the speed gradually rises to 2000-3000 rpm, and the operation is 2-3 minutes.

As long as there is no abnormality after installation, please go on the road to test, speed up the identification, test drive experience.

Package Included:

1pcs Turbocharger Fuel Saver