MegaWise 48 Modes（24 * 2） Dual Channel EMS TENS Unit Muscle Stimulator with 14Pcs Reusable Electrode Pads. Rechargeable Continuous Mode Electronic Pulse Massager with Storage Pouch/Pads Holder

OPERATING INSTRUCTIONS

Step 1: Prepare pads.
Connect 2 pads to the cord by snapping them on. Using the 1/4 wire, make sure that you use 1pc positive + 1pc negative wire (different colors indicate is it the positive one or the negative one). Remove the protective film.

Step 2: Placing pads.
Place pads where the massager impact is desired, over or near the injured area of the body. Make sure your skin is free from any dirt, oil, or lotion.

Step 3: Connect wires.
Connect 2 or 4 pads to both wires (A/B channel), place all connected pads on your skin at the same time for additional relief.

Step 4: Set up a time.
Turn ON the device by pressing the ON/OFF button. Press the “T“ button to adjust the time. Set up time from 10 to 60 minutes.

Step 5: Choose a mode.
There are 6 icons (6 main modes) on the screen, each icon has 4 built-in modes. Press the “M” button for 2 seconds to switch between 6 main modes. Press the “M” button quickly to choose built-in modes for each of the main modes. This Tens Unit has a mode memory function.

Step 6: Adjust the intensity.
Once you select a mode, press the “+/-” button to gradually increase or decrease the intensity. The default strength is the lowest strength set by each selected mode to avoid misoperation.

Step 7: A/B channel switching.
Short press the round center button to switch from A channel to B channel, repeat step 5, and step 6 to operate mode and intensity of B channel.

Step 8: Lock the screen.
After you set both A and B channels well, long-press the round center button for 3 seconds. The screen will show a lock symbol, all buttons are blocked now, TENS unit starts massaging. This function is designed to avoid mistouch.

Step 9: Shut OFF the appliance.
The TENS unit will shut OFF automatically after the countdown ends