Mini Pottery Wheel Kit for Kids, 2 Aluminum Alloy Turntable Spin and Sculpt Pottery Wheel Machine, 0-2000 RPM Adjustable Speed for DIY Tiny Pottery with Clay Sculpting Tool Set (red)

USB Mini Pottery Wheel machine

Specification:
Type: Pottery Making Machine

Power: USB cable, 5V

Machine size: 16*11*9cm

Turntable size: 4.5cm (thickness 0.7cm)

Fuselage material: plastic

Turntable material: aluminium alloy

Speed: 0-2000 rpm/min (no-load)

Weight: about 700g

Speed control mode: power supply mode of continuously variable speed

Knob: rated DC

Current: 1A

Features:
Small size, portable to take with.

Easy to operate with USB cable.

0-2000 rpm/min (no-load).

Aluminium alloy turntabl, durable and stable.

Package Included:
1 x Pottery Making Machine

Note:
Operation note:

1. Roll the clay into a cylinder, fix it in the center of the turntable and press it.

2. Use the ceramic tool alignment center to slowly open the hole, then slightly expand outward a bit.

3. Use ceramic tools to shape and trim the profile of your work.

4. Keep the rotating disc at constant speed and dry the work surface with a spray gun/ hot air gun.

5. Use tools from top to bottom to modify, and finally fix the bottom

6.After the work is completed, the work can be cut off with a scraper or a knife-edge tool

Suggestions:
1. Get smaller pieces of mud

2. Don’t rotate too fast and slow at a slower speed.

3. When shaping, you can stretch it out a bit thicker and then thin it out slowly.

4. Use clay tools to assist molding, less water.