MOUNTAIN_ARK DC 12V Submersible Pump 280L/H Water Pump with 6.5ft High Lift, Fountain Pump with 1.4 ft Power Cord, for Fish Tank, Pond, Aquarium, Hydroponics

Specification:
Voltage: DC12 V
Power :4.5w
Water height: 60cm
Water lift: 2m, 6.5ft
Max flow rate :280L/H
Shaft : Stainless steel
Product color: black
Outlet : OD 8.5mm
Power Cord : Length 43cm 24AWG
Product Size: 5*4*3cm
Packing size: 6.5*6.5*4.5cm
Total weight :85g
Warm Tips:

1. Before use, please confirm the voltage, power, power cord ,etc. are suitable for use.
2. The submersible pump can only be used in fresh water or seawater, and it cannot be used in corrosive liquids and flammable liquids.
3, Do not let pumps work in the water above 35 degrees Celsius or below the freezing point, otherwise it will cause damage to the submersible pump.
4, can not let the pump idle for a long time, so as not to damage the pump body.
5. When the power of the pump is found to be insufficient or does not turn, the power should be cut off in time to disassemble and clean the submersible pump rotor and shaft.
6. The submersible pump don’t has self-priming function, should be fully immersed in water to ensure that the submersible pump has a certain degree of cooling.
7. If the water quality is turbid and the pump is not cleaned for a long time, the current is too large after the blockage, and the copper wire is burned out. It is recommended to clean the pump once a month.