New WaterCop Electric Actuator Motor, 115VAC (1/2 through 1-1/14 inch) WCDACT1

Water Cop Electric Actuator for All WaterCop Valves .5 inches Valves to 1.25 Inches WCDACT electric actuator with alarm interface, internal antenna and built in I/O port and easy shut off buttons. Watercop motorized water valve actuator only: No valve included. Actuator interfaces with a 1/2 inch, 3/4 inch or 1 inch ” Water Cop Ready” brass ball water valve . No valves nor moisture sensors are included with the actuator. Red button turns off water flow. Push green button and valve is opened. 8 ft cord. 112VDC Motor. Water Cop Electric Actuator for Dynaquip Water Valve: Fully automatic: use electricity or batteries. Compatible with .5, .75, 1 inch and 1.25 inch Dynaquip lead free full port brass ball valves (Not Included) Security system interface. Built-in I/O port with RJ45 connection. Watercop moisture sensors and low temperature sensors sold separately. Low voltage interface terminal direct wires to home security alarm system or home automation control panel. For security systems with auxiliary outputs, contact security system dealer/installer for interface installation. 5 VDC output available from the WaterCop. Frequency: 418 MHz Wireless Range: approx. 100 to 200 feet Ambient Temperature: 35 degrees to 105 degreesF Enclosure: Polycarbonate Voltage: 12VDC, 60 Hz Power Cord: 20 feet. Approvals: FCC, UL Warranty: 2 Years Made in USA by Dynaquip Controls.