Sopoby 150PCS Solder Seal Butt Connectors Kit, Self-Solder Heat Shrink Wire Connectors, Waterproof Insulated Electrical Butt Splice for Automotive Boat Truck Wire Joint(7 Colors/7 Sizes)

Sopoby 150PCS Solder Seal Heat Shrink Butt Wire Connectors
 

SPECIFICATIONS:
Color: White, Red, Green, Blue, Purple, Yellow, Orange
Sizes:
5 x Orange Connectors: Diameter 7.0 mm, Cable cross-section: 10 mm²(A.W.G.: 8)
5 × Yellow Connectors: Diameter 6.0 mm, Cable cross-section: 4.0-6.0 mm²(A.W.G: 12-10)
20 × Purple Connectors: Diameter 5.4 mm, Cable cross-section: 2.5-4.0 mm²(A.W.G: 14-12)
30 × Blue Connectors: Diameter 4.5mm, Cable cross-section: 1.5-2.5 mm²(A.W.G: 16-14)
30 × Green Connectors: Diameter 3.4 mm, Cable cross-section: 0.75-1.5 mm²(A.W.G: 18-16)
40 × Red Connectors: Diameter 2.7 mm, Cable cross-section: 0.5-1.0 mm²(A.W.G: 22-18)
20 × White Connectors: Diameter 1.7 mm, Cable cross-section: 0.25-0.34 mm²(A.W.G: 26-24)
 

FEATURES:
▶Waterproof Seal – Dual-Walled tubing ensures waterproof seal and prevents wire corrosion. Hot melt adhesive & solder inside, sealed with advanced waterproof function.
▶Fast & Easy Operation – Just strip your wires, insert them into the connector and apply heat. Transparent sleeve provides precise inspection, easy control soldering process.
▶No Slip Wire Contact – Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding, avoids wires slipping out from the terminal.
▶Great wiring solution for hard to reach or limited space areas. Make properly soldered and waterproof connections in less than 30 seconds.
 

USING INSTRUCTIONS:
① Strip wire insulation 1/3 inch on both wire ends. Insert into the solder sleeve and twist the wire strands together.
② Continuously rotate the connector when using a heat gun to apply heat evenly around the solder until it flows into the wire strands.
③ Then apply heat to the two ends of the tubing until the adhesive flows and seals the wires.
④ Remove the heat and let it cool down for use.