Thule WingBar Evo 50” -Black

Aerodynamic roof rack system for an exceptionally quiet ride, easy installation of accessories, and maximum loading area.

Check with the assembly instructions that all the necessary parts are present.
Clean the car roof and those parts of the product that come into contact with the roof before and regularly during use.
Go through and carefully follow the assembly instructions and the recommendation list, if one is included. Then fit the unit in the correct sequence, that is to say 1, 2, 3 and so on.
If no special fitting positions are given in the assembly instructions, try to maintain a minimum distance of 700 mm between the load carrier bars.
When carrying long loads, the distance between the load carrier bars should not be less than 600 mm.
Every time the unit is fitted, check that the load carrier is sitting securely on the roof. Try to push and pull the carrier out of its locked position. Try also to pull out the tensioning tabs from the roof edge. If you manage to move any part of the unit, the load carrier must be secured more firmly. This test should be carried out regularly.
Some types of sunroof and radio antenna cannot be used when the carrier is fitted.
The roof rack is permitted to be assembled on cars with glass roof, unless otherwise is specified in mounting instruction.
The manufacturer can not be held responsible for personal damages of property or loss of fortune caused by incorrect mounting or use of the product.
No modifications to the product are permitted.
Consult with your dealer if you have any questions regarding the operations and limits of the products.